Nerf Adjustable Battery Stock

An adjustable batter stock for any nerf stock attachment point. Not all files are in proper print orientation.


Notes:

1) Stock is adjustable using a 1/4 quick release pin (1 3/4" long).

2) Butt attaches using two m3 heat set inserts in the stock body and two m3 x 20 button
cap or socket cap screws.

3) Stock catch uses two small springs and four #3 x 3/8".

4) If you would like to print a TPU butt pad, use one of the butt plates and one of the two
separate butt