360 degrees Pan Camera Mount

This is a heavy-duty 360 degree pan system for a long-range RC plane or other applications.
You can mount a GoPro, Runcam or other cameras on it.

I printed it with 100% filling, a 0.4 mm nozzle and 0.2 mm layer thickness.

I printed everything with PETG. but PLA probably works well too.
Keep in mind that you set the temperature a little higher so that it is stronger

The servo is adjusted to a 360 degree servo

sand the 3D printed parts before gluing with CA Super Glue




The required materials are:

1 x - 6700ZZ 10x15x4mm Bearing.
https://www.banggood.com/10pcs-6700ZZ-10x15x4mm-Deep-Groove-Ball-Bearings-Miniature-Bearing-p-1185030.html?akmClientCountry=NL&rmmds=myorder&cur_warehouse=CN

1 x - 6803ZZ 26mmx17mmx5mm Bearing
https://www.banggood.com/10pcs-6803ZZ-26mmx17mmx5mm-Ball-Bearings-Deep-Groove-Ball-Bearings-p-1147149.html?akmClientCountry=NL&rmmds=myorder&cur_warehouse=CN

1 x - MG92B 13.8g 3.5KG Torque Metal Gear Digital Servo - adjusted to a 360 degree s