360° FPV Gimbal - Slip Ring

## Premise: ##

This is a small continuous rotation FPV gimbal, that uses a slip ring to transfer power and data to the top half. Comes with a dome rain cover, and optional funky spotlight for spotting targe- ... err... things!

## Hardware: ##

The parts list is as follows:

* M2 x 10mm Screws - 11pcs
* M2 x 4mm Screws (it's possible to cut the 10mm ones down) - 4pcs
* M2 Washer - 2pcs (only required for top cover)
* SRC-22 22mm flanged Slip Ring (4 or 6 channel)
* 9g Micro Servo - 2pcs (One must be a continuous rotation servo, there are lots of tutorials online on how to convert them)
* Eachine TX03 - recommended but feel free to substitute with any FPV camera (see below)
* OD20mm clear plastic circle (for required for spotlight glass)
* 3mm Warm White LED (for spotlight only)
* Thin zip ties

## Tips: ##

* The TX03 camera can be used with the 4 wire slip ring if you give it power and ground from the 3 servo wires, but if you use another camera with a separat