Thingiverse

360cam lens cover

by jonnyg30

2 Downloads

1 Likes

0 Makes

Needed something to protect the double lenses on my 360 camera. This was designed to fit the vivitar 360 cam but there are loads of cameras that use the same body/design so it should fit any camera that looks like this.

It must be printed in a flexible material, it is not suitable for normal ABS, PLA, PETG etc etc.

simply print out, attach a rubber band and it's all good. Designed to remain fitted when attached to grip/selfie stick/tripod the cover just folds down out the way but it will fit upside down and at an angle if you wanted to fully remove it when attached to an accessory.

Printed in Generic "ebay" flex filament.
no supports necessary (may be needed if you struggle with the top of the domes)
fits on 150mm bed if angled 45deg
0.2mm layer height but should work at others
1Hr:20min print time

The cap should pretty much push fit on to the lens locking ring, if it doesn't you may need to adjust the scale.

360 360 camera amkov DVR 988 HD Kaiser Baas lens cap Lens Cover lens hood lens protector safari virtual reality Vivitar vr camera 360 360 camera amkov DVR 988 HD Kaiser Baas lens cap Lens Cover lens hood lens protector safari virtual reality Vivitar vr camera

Source

Thingiverse

What you need to print this: Beginner

Why?

no supports · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, ABS, PETG

Min. bed size

50 mm (Small)

Layer height

0.2 mm

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for 360cam lens cover?

Any FDM printer should handle 360cam lens cover just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does 360cam lens cover need supports when printing?

No supports needed for 360cam lens cover — it's designed to print clean off the bed.

How long does it take to print 360cam lens cover?

According to the design notes, 360cam lens cover takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

Is 360cam lens cover beginner-friendly?

Yes — 360cam lens cover is a solid beginner print. Nothing tricky going on here, good choice if you're just getting started.

What file format is 360cam lens cover available in?

360cam lens cover is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is 360cam lens cover free to download?

Yes, 360cam lens cover is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

360cam lens cover

Add to Collection