Thingiverse
S800 Nose and Canopy - Falkor MINI / Predator MINI
30
Downloads
21
Likes
0
Makes
Made for foxeer falkor mini and predator mini(not Micro)
cavity for extra 18650 battery space in the nose.
Use 102mm of piano wire or similar for the hinge.
Nose is printed on its back with the camera pointing up, supports everyware.
canopy is printed standing up with the hinges pointing up, supports everyware.
I used a 10mm brim when printing the canopy in petg, good bed adhesion is manditory!
cavity for extra 18650 battery space in the nose.
Use 102mm of piano wire or similar for the hinge.
Nose is printed on its back with the camera pointing up, supports everyware.
canopy is printed standing up with the hinges pointing up, supports everyware.
I used a 10mm brim when printing the canopy in petg, good bed adhesion is manditory!
Sign in to leave a comment
Sign in