Simple mount plate for the Zesty Nimble V1 on a Tevo Flash

A very simple mount plate to bolt a Zesty Nimble to the Tevo Flash.
It does require two holes to be drilled in the alu plate that holds the hot end and BL Touch.
You can use the Nimble mount plate to position the holes in the right spot and then drill with a 3.5 mm drill.

The Nimble mount plate needs slightly longer screws than the screws used for the hot end and the BL Touch. Use M3x14 screws instead of the M3x10 now in use.

Also included is a filler to fill up the threaded hole for