Railcore II 300 ZLT Yoke Alignment Tool To Align Linear Rails, Lead Screws, & Steppers

There is a version of a tool to do this job on the 300ZL, but I did not find one to work with the ZLT. The ZLT has bearing carriers and bearings that support the lead screw, so the tool needs to be different. Once the bearing carriers and the motor are mounted, you cannot remove the coupler or the bearing carrier to get directly to the motor shaft.

This allows you to drop the tool through the bearing in the carrier and into the coupler. Then you can use this to line up the with the yoke.