Thingiverse
SKR 1.3/1.4 Enclosure 3030
by c4krauss
298
Downloads
203
Likes
3
Makes
**SKR 1.3/1.4 enclosure**
*(I tested and this does work with the MKS GEN L board as well)*
Made for use with a Haribo (or any) 3030 extrusion frame. The mounts to the frame are for M6 x 12mm (socket head) bolts.
The top cover should be attached with (4x) M3 6mm or 8mm screws. The top hole on the cover is meant for running wires for the extruder and zip tying them with strain relief. The bottom one is meant for the LCD ribbon cables.
I printed with PLA or PETG (for the overhangs) and
*(I tested and this does work with the MKS GEN L board as well)*
Made for use with a Haribo (or any) 3030 extrusion frame. The mounts to the frame are for M6 x 12mm (socket head) bolts.
The top cover should be attached with (4x) M3 6mm or 8mm screws. The top hole on the cover is meant for running wires for the extruder and zip tying them with strain relief. The bottom one is meant for the LCD ribbon cables.
I printed with PLA or PETG (for the overhangs) and
Sign in to leave a comment
Sign in