R C Vintage Wheel 137mm

This wheel has a total diameter of 137mm, the rim is composed of two parts, one outer with greater curvature and the other with less curvature, which are joined by 6 M3x10 allen bolts and M3 nuts with brake. The bushing is joined by 3 Allen screws M3x19. You will need support to print these and a filling of at least 20% to give it rigidity.
The drill for the shaft is 6mm, if you use a 5mm rod you can insert a brass insert of 5mm inside and 6mm outside.
The cover has a diameter of 15mm, I used