37" Diameter Windmill / Spinner

My previous windmill/spinner was nice (http://www.thingiverse.com/thing:1536061) but... I wanted to print something big and functional on my 8.9" x 5.7" x 5.9" print area printer, so... here it is, a 37" inch diameter yard windmill/spinner. :)

I drew it up so that there is almost no support needed. The only part that requires support is the Mount.

Printed with PETG, since it's my favorite stuff. 6 layers top, bottom, and sides with 20% infill.

You will also need some hardware (*I've included a pic*) and 3/4" water pipe. Everything is relative to what you have as I designed it to what hardware I had on hand. I used:

6pcs of 4d finish nails
6pcs of 3mmx10mm nylon screws
2pcs 1/4-20x2" bolts
4pcs 1/4" washers
4pcs 1/4-20 nuts
glue
3/4" water pipe (1.05 OD)