370z Hueforge

Project: 370zPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.05x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Steel Grey Transmission Distance: 1 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Steel Grey At layer #12 (1.04mm) swap to Savannah Yellow At layer #18 (1.52mm) swap to Jade White for the rest.