EINSY motherboard frame brace for MK3 and MK3S

I wanted to completely get the electronics out of my enclosureso I took over the design of the Taurus Z-axis brace to fit it on the EINSY card side and that's the result.

You will need 3 M3 screws with their nut and you will have to sand the screw head a little bit of the middle one to allow free vertical movement.

If you don't have polycarbonate you will still get good rigidity from PETG. I recommend 0.15 layer, 10% Gyroid.

Thx to JLTX ! Go see his designs! https://www.thingiverse.com/