Copymaster 3D 500 brace bars

Brace bars for the Copymaster 3D 500. Bars are offset outboard to avoid getting in the way of the Z axis.

Other parts required:
2no. 800mm lengths of 2020 aluminium extrusion.
18no. M4 x 8mm socket cap screws.
18no. M4 T nuts.

The bars are at 30 degrees from the vertical so cut the ends at 30 degrees.

I like this printer due to its build volume and direct drive extruder however here are some handy tips for Copymaster 3d 500:
For better surface finish when using PLA modify the fan sh