Sonoff Mini FTDI Programing jig

After you print it out, you'll need to drill out the holes for the pogo pins and use hot glue to ensure that they do not short out on each other. Refer to this wiki for loading Tasmota onto the board https://github.com/arendst/Sonoff-Tasmota/wiki/Sonoff-DIY. The jig will gently snap onto the board. Make sure that the pogo pins are properly lined up before powering on the FTDI.

Here's the parts list.

6 - P75-E2 Spring Test Probe Pogo Pin 1.3 mm Conical Head 1.0mm (I recommend having spa