Thingiverse
Blackhawk Lowboy 3 Switch Mount
by doenute
2
Downloads
3
Likes
0
Makes
This 3D print is useful for relocating the run/start switch on the Aero 1000 engine powering a Lowboy 3 quad powered Paraglider.
Additional parts required are:
2 pieces M4 X 25mm SHCS
2 pieces M4 X 40mm SHCS
4 pieces Heat set inserts: McMaster-Carr 94180A353
The heat set inserts are applied with a soldering iron into pockets on the back of the clamp to receive the cap screws.
Additional parts required are:
2 pieces M4 X 25mm SHCS
2 pieces M4 X 40mm SHCS
4 pieces Heat set inserts: McMaster-Carr 94180A353
The heat set inserts are applied with a soldering iron into pockets on the back of the clamp to receive the cap screws.
Sign in to leave a comment
Sign in