The Trap Door (1986) Play Area

Fun Print - Made to compliment https://www.thingiverse.com/thing:3462502
Printed with a 0.8mm nozzle at large layer height, tho 0.4mm will work fine at 0.2 or 0.24mm height
* Important - Enabled FUZZY SKIN on cura to get texutred effect
Big ups to old mate who made the Burk, Boni, Worms, Dratt publically available

M3x20mm screws used to secure door to base
M5x20mm screws used so secure feet to base (optional)

Good Luck!