MakerWorld
2D Art
Go to Model
3d effect lizard - Hueforge
67
Downloads
54
Likes
27
Makes
Lizard in leafs - 4 colour hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mm Filaments Used: #000000 PLA Kingroon Black Transmission Distance: 0.1 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 2 #ffffff PLA sunlu white Transmission Distance: 6.8 This print uses 4 unique filaments Swap Instructions: Start with Kingroon Black At layer #10 (0.88mm) swap to BambuLab Basic Blue Gray At layer #17 (1.44mm) swap to BambuLab Basic Gray At layer #25 (2.08mm) swap to sunlu white for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
