3D Printer Accessories STL Download - Filament rollerby Benjamin_282

Filament roller for all sizes from 1kg to 5kg.Print settingsPrint with a layer height of 0.2mm.The legs need to lay down flat to print without support.The cilinders need to be printed standing up, do not use supports on this!There are two points where you need to pause at heightto be able to put the nuts in the cilinders.AssemblyAdd 4 bearings into the legs (16mm x 5mm, 8mm hole)Use 8 washers on both sides of the bearings (16mm x 1-2mm, 8mm hole).Assemble with 4 bolts (M8 x 25mm).HardwareWashers 8 (16mm x 1-2mm, 8mm hole)Nuts 4 (M8)Bolts 4 (M8 x 25mm)Bearings 4 (16mm x 5mm, 8mm hole)