3D printable Bearings

Hope you enjoy my Bearing of the 608 and 6008, I recommend printing at 100% infill for these bearings. I made the bearings with the 3 curves in its design to make sure the bearing doesn't wiggle a lot and just move like intended. The bearing that is taken apart was a failed one of the previous testing phase but showing it in the picture of what it look like on the inside. Printer must be able to print at a high tight tolerance, the inside gap alone is 0.15mm gap and the inside and outside parts is only 0.010ish off from a the dimensions of the bearing. But still needs to be able to print at a high tolerance.Boost Me