Thingiverse
3D Printable Nerf CrossBow
von deadtomgc
126
Downloads
78
Likes
1
Makes
Hot tip, use q-tips to put the joints together.
UPDATE 2:
AutoNotcher now included! Print the arms.stl and autonotcher.stl, and glue them together for easy notching action. Also, I recommend gluing in the insert.stl for more reliable notching.
I made this since my daughter had trouble grabbing the rubber band and pulling it back while holding the bow... it's kinda hard really.
UPDATE: I've tweaked some of the sizes and tollerences after having issues with the front sight, back post, and the trigger being a little tight.
Fixed geometry to make it easy to print.
I intentionally made the parts thinner than is called out in the design so that they easily slot together for gluing. I also made the handle smaller to make it fit on my print bed and fit easier in my daughter's hand.
2 blend files included.
UPDATE 2:
AutoNotcher now included! Print the arms.stl and autonotcher.stl, and glue them together for easy notching action. Also, I recommend gluing in the insert.stl for more reliable notching.
I made this since my daughter had trouble grabbing the rubber band and pulling it back while holding the bow... it's kinda hard really.
UPDATE: I've tweaked some of the sizes and tollerences after having issues with the front sight, back post, and the trigger being a little tight.
Fixed geometry to make it easy to print.
I intentionally made the parts thinner than is called out in the design so that they easily slot together for gluing. I also made the handle smaller to make it fit on my print bed and fit easier in my daughter's hand.
2 blend files included.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
