3d printed 2d pikachu

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.24mm The Max allowed Thickness is 2mm and the Actual Thickness is 1.92mm Filaments Used: #7d6556 PLA BambuLab Matte Dark Brown Transmission Distance: 2 #ffa4d7 PLA Prusament Ms. Pink Transmission Distance: 4.1 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 3 unique filaments Swap Instructions: Start with Dark Brown At layer #6 (0.56mm) swap to Ms. Pink At layer #13 (1.12mm) swap to Yellow for the rest.