3D printed spool holder, filament rack, 3D stackable shelf. Storage organizer

自己设计并且使用的耗材放置架子。中间的用的pvc水管2cm直径的。一般去五金店都可以买到，一般都是单根4米的（10元左右），可以让老板帮忙切成2m的，或者是根据需求长度切割。第一盘是堆叠架。第二盘是柱子。如果你跟我一样是放置宽度2m的货架上的，因为pvc水管不是特别硬，可以跟我一样弄，也就是第一第二盘各打印两次。第三盘是增高脚垫，不是必须打印的，只是为了跟我一样前后三排，然后增高后容易看到后面的耗材。中间的高度有24cm左右，如果你不想要拆耗材包装，也可以竖着放进去的，如果跟我一样想多层，为了安全，建议还是跟我一样找扎带捆好柱子。所需耗材：500g，建议选择petg的（便宜的就行），不建议pla，毕竟是受力的结构件。 I designed and used a shelf for 3D printing consumables. The middle one uses a 2cm diameter PVC water pipe. You can usually buy it at a hardware store. It is usually a single 4-meter pipe. You can ask the boss to help cut it into 2m, or cut it according to the required length. The first plate is a stacking rack. The second plate is a column. If you are placing it on a shelf with a width of 2m like me, because the PVC water pipe is not particularly hard, you can do it the same as me, that is, print the first and second plates twice each. The third plate is a heightening foot pad, which is not necessary to print, but just to make it three rows in front and back like me, and then i