Thingiverse

3D Printed Stirling Engine Type Alpha – Bild 1

3D Printed Stirling Engine Type Alpha – Bild 2

3D Printed Stirling Engine Type Alpha – Bild 3

3D Printed Stirling Engine Type Alpha – Bild 4

3D Printed Stirling Engine Type Alpha

von petrzmax

1.8k Downloads

1.8k Likes

7 Makes

Zum Modell

If You enjoyed this project and You want to say "Thank You" please consider supporting me by sending a tip on thingiverse or my PayPal here.

My version of 3D printable Stirling engine. You can see a bit of the process of assembly and operation of the engine here: https://www.youtube.com/watch?v=kttaajHHPeY

Check my I3 Mega **ULTIMATE upgrade guide!** There is a lot of knowledge which may help You get the best 3D printing results. You will find it here: http://bit.ly/2OVbu5Z

Tips:
- Make sure that Your printer is calibrated well before printing.
- Do not fix syringes too tight because glass will bend a little and it will create a lot of friction inside.
- Pistons must be polished with fine sandpaper to move freely inside cylinders, but without losing too much pressure.
- Angle between the cranks must be 90 degrees.

Part list:
- 12 x M8 Nut
- 12 x M3x10 Screw
- 18 x M3 Nut
- 2 x M3 self-locking nut
- 8 x M3x14 Screw
- 4 x M3 Washer
- 6 x M4 Washer
- 4 x M4 Nut

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat