Thingiverse
3D printed telescope
door xl0e
46
Downloads
82
Likes
0
Makes
Fully 3D printed (except for the lenses) compact telescope.
The lens is D62F360 doublet.
The eyepiece is any 1.25".
**Fasteners**
M3 nuts or inserts - 7pcs
M3 screws 12-15mm - 4pcs
M3 screws 18-25mm - 3pcs
M4 screw 24-25 mm - 1pcs
M4 nut - 1pcs
Superglue - optional.
**Printing details**
Material - PLA or PETG (black color is preferred).
Supports - no.
Build plate adhesion - brim (5-7mm).
Layer height:
Parts with thread - 0.1 mm (1st layer 0.2 mm). Better to add -0.05 or even -0.1 horizontal expansion.
Other parts - 0.2 - 0.25 mm.
The lens is D62F360 doublet.
The eyepiece is any 1.25".
**Fasteners**
M3 nuts or inserts - 7pcs
M3 screws 12-15mm - 4pcs
M3 screws 18-25mm - 3pcs
M4 screw 24-25 mm - 1pcs
M4 nut - 1pcs
Superglue - optional.
**Printing details**
Material - PLA or PETG (black color is preferred).
Supports - no.
Build plate adhesion - brim (5-7mm).
Layer height:
Parts with thread - 0.1 mm (1st layer 0.2 mm). Better to add -0.05 or even -0.1 horizontal expansion.
Other parts - 0.2 - 0.25 mm.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
