Slicer Discord
3DSEARCH / Gadgets / 3D Printed Watercooled PC Case
3D Printed Watercooled PC Case – 3D printable model from Thingiverse Thingiverse
3D Printed Watercooled PC Case – Bild 1 3D Printed Watercooled PC Case – Bild 2
Gadgets

3D Printed Watercooled PC Case

by Printed_Props · Gadgets
346 Downloads
268 Likes
1 Makes
Go to Model
A 3D Printable PC case designed I designed and built myself.

Uploaded here in case anyone wants a challenging project.

Also a video showcase on Youtube: https://www.youtube.com/watch?v=DKSNKyu7UWE

Approx 2.5kg of filament.

Case specifications:
Motherboard size: mITX (170x170mm)
Supported Graphics Card: 280mm Length, 2.5 slot max
PSU size: SFX (Mine is Corsair SF750)
CPU Air Cooler: Low profile air cooler ~60mm height max
Distro Plate: Rear Panels Designed for Lian Li PC-O11 Distro-Plate G1 Distro Plate
Cooling Front: 2x 120mm Fans with 240mm Radiator
Cooling Bottom: 2x 120mm Fans with 240mm Radiator
Overall Size in mm (Including Pump, Feet & Side Panels): 520W x 460H x 240mm

Note: I have only built this as a water cooled setup. Results may vary with air cooled setups.

Use files at your own risk, I take no responsibility for property damage / injuries etc.
Category
Gadgets
Source
Thingiverse
Published
What you need to print this: Beginner Medium confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA, Polycarbonate
Min. bed size
170 mm (Medium)
Est. print time
60 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for 3D Printed Watercooled PC Case?
Any FDM printer should handle 3D Printed Watercooled PC Case just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 170 mm is recommended.
How long does it take to print 3D Printed Watercooled PC Case?
According to the design notes, 3D Printed Watercooled PC Case takes approximately 60 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is 3D Printed Watercooled PC Case available in?
3D Printed Watercooled PC Case is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is 3D Printed Watercooled PC Case free to download?
Yes, 3D Printed Watercooled PC Case is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
ITX open frame compatible with ATX PSU (Modified)
ITX open frame compatible with ATX PSU (Modified)
by LNC3D
↓ 75 ♥ 17
Mini ITX SFX No GPU Computer Case
Mini ITX SFX No GPU Computer Case
by mario54bro
↓ 3 ♥ 3
3.73L Mini ITX Case
3.73L Mini ITX Case
by marcospnz
↓ 1 ♥ 1
Under 4L ITX Case - Screen Holder Expansion
Under 4L ITX Case - Screen Holder Expansion
by marcospnz
ITX computer SFF Case: 3.73L easy assembly
ITX computer SFF Case: 3.73L easy assembly
by marcospnz
Round Mini IXT Case
Round Mini IXT Case
by Cacodaemon
↓ 64 ♥ 55
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection