3D Printer LED lighting upgrade support Channel

This is a channel that can be used to slide in lengths of 8mm 24V COB LED strip to upgrade the lighting of your printer. This strip makes it easier to install but also easier to remove if you need to. There are 4 sizes included: 400 - Suitable for Creality K2 Plus.350 300 250 For example, a K2 Plus you can then attach a JST 1.25 socket to one end and if you like either use more JST 1.25 plugs and sockets at the ends to connect more sections. Once this is done add industrial strength Velcro to the back- I would suggest 3 sections of about 40mm . you can then install this in your printer. Make sure the strip is not at the same height as the cable chain. I used 2 sections on mine but you could use 3 or 4 if you wanted. You can just disconnect the existing lights and connect the cable to these. Different printers will require adjusting how you power and wire in these strips. I would not suggest using PLA as it will soften in the printer due to the temperature.