Thingiverse
3D printer PSU case
por Simon_prints
5
Descargas
3
Likes
0
Makes
I designed this PSU case to fit my standard size PSU to a 2020 aluminum frame.
It's flush with the frame at the inside.
It contains 2 screw holes (M3x10) to secure the back side of the PSU to the print, this is not required.
It's designed to be symmetrical to the RAMPS 1.4 & MOSFET case by Lokster
(which is a brilliant design, i 100% recommend it)
https://www.thingiverse.com/thing:3039756
Always be safe when working on high voltages
cheers
It's flush with the frame at the inside.
It contains 2 screw holes (M3x10) to secure the back side of the PSU to the print, this is not required.
It's designed to be symmetrical to the RAMPS 1.4 & MOSFET case by Lokster
(which is a brilliant design, i 100% recommend it)
https://www.thingiverse.com/thing:3039756
Always be safe when working on high voltages
cheers
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!