3DLAC/alcohol holder

Holders for bottles of stuffs used around 3D printer. In my case, that is a can of 3DLAC and isopropyl alcohol. I have them attached to table legs so that they are easy to reach but do not take any extra space. Conveniently, two legs = two bottles. This project file contains three different heights of the holder, 100/125/150mm, and five radiuses of bottles, 45/50/55/60/65mm. The one I use for 3DLAC is 50mm radius and 150mm high. Rule of thumb for me, bottle radius of the bottle -5mm is radius of the holder. It is a little stiff after printing, but loosens up a bit after a while. The screw holes are for 4.5mm screw, 9mm head diameter and 3.5mm height. Print of single holder takes about an hour with default settings. The stats on the profile and plate are off the charts because there are multiple versions at once in the project.