3rd Gen 4Runner Cargo Cover Mount

Work in progress

Materials:
1. Screwdriver
2. 3x M4x8mm screws if using heatset inserts
3. 3x M4 heatset inserts if using. https://www.mcmaster.com/94180A351/
4. Drill to drill holes into cargo cover trim panel.
5. PETG, ABS, ASA to print it in. Any will work but in that order for least to most fit

Made this adapter to make use of the cargo cover plates on my old 4Runner. The main plate fastens to the cargo cover trim piece with 3x M4x8mm screws. The plate has a female dovetail joint so various mount plates can be attached.

I've included a few files here-

1. Cargo_Mount_Adapter_Plate.stl - This is the plate that mounts to the cargo cover trim piece

2. Cargo_Mount_Adapter_Plate_TEMPLATE.stl - a 2 layer extrusion of the above file, just used to mark up the 3 holes you need to drill in the cargo cover trim piece

3. Hook.stl - A basic hook I made to test the fit and stuff. This has a 0.2mm offset and still fits loose for me so I'll be reducing the offset, but of course printers