3way distribution with blast gate

EN

remixed the HT Blastgate into a 3 way distribution block
I wanted a three way distribution with blast gates for my workshop, that suits my specific needs.

there are three connection pieces.
one with ID50 - inside diameter 50mm
one with AD50- outside diameter 50mm
one with a thread for a 32/35 vaccum hose. print the top part first to see if the thread fits your hose.


changed the bolts to M5
the lock plate has to be printed 3 times. I reduced the height of the locking knob a little bit, so that it runs smoother

My pipes fitted well into the female port. I had no need to use the sealing ring.

what you need:
M5x20 Bolts, nuts and washers
maybe HT 50 sealing rings for the female ports

_____________________

DE

hier mein remix von dem HT Blastgate
Für meine Werkstatt wollte ich unbedingt einen 3-fach Verteiler vom Staubsauger mit Absperr Schieber.

für das 3-auf-1 Rohr gibt es drei Varianten:
mit ID50 - Innendurchmesser 50mm
mit AD50 - Außendurchmesse