Thingiverse
3x3x6
door kequals
105
Downloads
87
Likes
0
Makes
This is a 3x3x6 twisty puzzle. Each short face can turn in increments of 90 degrees, and each long face can turn 180 degrees. This puzzle cannot shapeshift.
To make this print each part by the number of times indicated on the file name.
* 1 Alignment
* 3 Hidden Edges
* 4 Short Centers
* 2 Long Centers
* 8 Outer Corners
* 8 Outer Edges
* 8 Middle Corners
* 8 Middle Edges
* 7 Inner Corners
* 8 Inner Edges
* 1 Core (not recommended)
There are 7 inner corners and 3 hidden edges because the alignment piece combines one of each.
It is highly recommended to use a factory-made core rather than a 3D printed one. You can buy one here:
https://thecubicle.us/qiyimfg-core-p-8461.html
You also need 6 M3 screws, which can be bought here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers are standard 57mm 3x3.
To make this print each part by the number of times indicated on the file name.
* 1 Alignment
* 3 Hidden Edges
* 4 Short Centers
* 2 Long Centers
* 8 Outer Corners
* 8 Outer Edges
* 8 Middle Corners
* 8 Middle Edges
* 7 Inner Corners
* 8 Inner Edges
* 1 Core (not recommended)
There are 7 inner corners and 3 hidden edges because the alignment piece combines one of each.
It is highly recommended to use a factory-made core rather than a 3D printed one. You can buy one here:
https://thecubicle.us/qiyimfg-core-p-8461.html
You also need 6 M3 screws, which can be bought here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Stickers are standard 57mm 3x3.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!