Thingiverse
3x5x5
di kequals
90
Download
69
Likes
2
Makes
UPDATE 7/30/18: Adjusted tolerances and made corners thicker. They shouldn't be as fragile now.
A 3x5x5 twisty puzzle. It is fully functional, so it can also shapeshift.
To make, print each part by the number indicated on the filename.
You need 6 M3 screws and 6 springs. You can buy them here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Due to the mechanism cutting very close to the top and bottom, there isn't any room for top center caps. Make sure the screw isn't protruding and place a 4x4 sticker directly over the hole. It should cover the hole completely.
The the 3x5 sides use 62mm 4x4 stickers, and the top and bottom stickers can be cut from the template.
A 3x5x5 twisty puzzle. It is fully functional, so it can also shapeshift.
To make, print each part by the number indicated on the filename.
You need 6 M3 screws and 6 springs. You can buy them here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
Due to the mechanism cutting very close to the top and bottom, there isn't any room for top center caps. Make sure the screw isn't protruding and place a 4x4 sticker directly over the hole. It should cover the hole completely.
The the 3x5 sides use 62mm 4x4 stickers, and the top and bottom stickers can be cut from the template.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
