4" AC Infinity Refillable Carbon Filter Enclosure

This 3D printable enclosure housing is designed for the AC Infinity Refillable Carbon Filter Kit 4". I initially misunderstood the filter's design, expecting a simple inline flow. However, this filter draws air through its entire outer shell, processes it through an internal carbon core, and exhausts it from the top.Inspired by Clough42's H2D exhaust port and connectors, I developed this housing. Be aware: this is a large print, consuming nearly a full kilogram of filament. I recommend the following material choices:PETG-CF for the outer shellTPU-90A for the gasketsPLA or PETG-CF for the topFor print settings, I used 10% lightning infill and enabled supports. Before printing - I recommend:Flip the lid in your slicer to reduce support material.Combine the two gasket parts onto a single print plate if you're using the same material for both.You'll need to utilize the 4-inch connector from the original Clough42 model.I utilized electrical tape to seal and tape the top