4 digit secret box

4-digit secret box. It is a great accessory to brighten up escape rooms where you need to find clues to help unlock the box. The box can be used to insert clues/keys for the sequel as it has a large internal space (35x35x90mm). It has over 450 000 different combinations. Of course, it can also be used for decoration or to brighten up a room. It has four dials that rotate. On each dial there is one place that allows the core of the box to be pulled out. On each dial there are 26 spaces for numbers and letters. Add symbols or letters to the spaces as you wish, you can do this in the slicers or you can draw/add them once it's printed. ASSEMBLY INSTRUCTIONS: -Remove the supports, -Try to assemble the parts to see if they fit, -If the holes are too narrow use a 3 mm drill bit and enlarge them (depending on the tolerances of the 3d printer), -put glue in the holes and set (without core), -MARK the dials if you haven't already because if you don't it will be difficult to open them later, -after the glue has dried you can insert the core.