4-into-1 PTFE Adapter Mounting Bracket

This mount is for Bambu Lab’s 4-into-1 PTFE Adapter (https://us.store.bambulab.com/products/bambu-4-in-1-ptfe-adapter) that allows 4 separate inputs into the toolhead of the X-series/P-series printers. My particular setup is a Bambu P1P with ARC enclosure kit, but it should work on any P-series or X-series as long as your current modifications do not cause interference. I discovered that mounting the bracket directly to the back of the printer put the PTFE input tube at an awkward angle that caused friction issues when feeding the filament so I designed this mount to solve that issue. Many different angles and lengths were tried before settling on this final design. I have over 100 hours of printing with this mount and it has performed flawlessly. The mounting holes allow the bracket to be adjusted slightly in the lateral direction before tightening down the M3 bolts. My 4 inputs are: 1) External Spool mounted on the left side of the printer 2) AMS input fed directly from the output of