Thingiverse
4 Knife display stand
par tomfrajman
1.1k
Téléchargements
1k
Likes
12
Makes
This is a variation on my 5 Knife display stand :-) It is better suited for medium to large sized knives. Dimensions approx. 11cm x 11cm x 10 cm.
You need to print 1x left wall + 1x right wall + 4x connecting bar. The bars are friction fit but you can also glue them. You can also combine with my stacking extension! :-)
Test printed on Kodama Trinus. (PLA, 0.2mm layer, 20% infill)
If you want to support my work you can send me a tip via Paypal
Or you can buy the print from users who have licensed my design: plavro (eBay), Vede3D (Etsy), BassAvid (Etsy, eBay), Quezadillaprinting (Etsy)
Thank you :-)
You need to print 1x left wall + 1x right wall + 4x connecting bar. The bars are friction fit but you can also glue them. You can also combine with my stacking extension! :-)
Test printed on Kodama Trinus. (PLA, 0.2mm layer, 20% infill)
If you want to support my work you can send me a tip via Paypal
Or you can buy the print from users who have licensed my design: plavro (eBay), Vede3D (Etsy), BassAvid (Etsy, eBay), Quezadillaprinting (Etsy)
Thank you :-)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
