Thingiverse
4-stroke Compressed Air Engine
von AxelDayton
185
Downloads
181
Likes
0
Makes
This Is my fully functioning 4 stroke compressed air engine! It works very similar to every other, except it is a 4 stroke. Everything exept the head gasket can be printed in PLA, the head gasket was designed for NinjaFlex. If you don't have ninjaflex, just use 1mm thick gasket material.
Parts List:
- 1 6mm Ball Bearing
- 1 8.1mm x 5.6mm x 1.8mm O-ring
- 2 7mm x 22mm x 8mm Ball Bearing
- 2 5mm x 16mm x 5mm Ball Bearing
- 1 M3 x 10mm Machine Screw
- 8 M3 x 20mm Machine Screws
- 1 800 and 1200 grit sandpaper
- 1 19.8mm x 22mm x 2.4mm O-ring
- 1 2L bottle
- 1 Tubeless Presta Valve
- 12 5mm Nuts
- 1 Super Glue (to glue the jug and crankcase)
Build and Test Video:
https://youtu.be/1UAs45Ae-gA
If you want to see more projects like this, please consider subscribing!
https://www.youtube.com/axeldayton
Parts List:
- 1 6mm Ball Bearing
- 1 8.1mm x 5.6mm x 1.8mm O-ring
- 2 7mm x 22mm x 8mm Ball Bearing
- 2 5mm x 16mm x 5mm Ball Bearing
- 1 M3 x 10mm Machine Screw
- 8 M3 x 20mm Machine Screws
- 1 800 and 1200 grit sandpaper
- 1 19.8mm x 22mm x 2.4mm O-ring
- 1 2L bottle
- 1 Tubeless Presta Valve
- 12 5mm Nuts
- 1 Super Glue (to glue the jug and crankcase)
Build and Test Video:
https://youtu.be/1UAs45Ae-gA
If you want to see more projects like this, please consider subscribing!
https://www.youtube.com/axeldayton
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
![[7] Air Pressure Engine (Pneumatic) - 1 cylinder - 5.3 ccm](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Fassets%2F34%2F35%2F73%2F11%2Fe8%2Flarge_display_Internals.png&w=400&h=300)