Prusa Mini Lamp Holder
by MrBaham
43
Downloads
19
Likes
0
Makes
Just a small Holder for the Prusa Mini. The Lamp is the USB Lamp from Banggood
The Lamp is getting hot so don't use PLA!
Only use 500 mA USB Plug otherwise the Lamp is getting to Hot!
For Mounting on the Mini i used a 5x12 Screw and a M5 T-Nut.
I used also a bit 3M double sided tape to fix the Lamp in the Holder.
https://www.banggood.com/35CM-7W-24-SMD-5630-USB-Rechargeable-LED-Rigid-Strip-Hard-Bar-Light-Tube-Lamp-DC5V-p-1190966.html?rmmds=myorder&ID=515219&cur_warehouse=CN
The Lamp is getting hot so don't use PLA!
Only use 500 mA USB Plug otherwise the Lamp is getting to Hot!
For Mounting on the Mini i used a 5x12 Screw and a M5 T-Nut.
I used also a bit 3M double sided tape to fix the Lamp in the Holder.
https://www.banggood.com/35CM-7W-24-SMD-5630-USB-Rechargeable-LED-Rigid-Strip-Hard-Bar-Light-Tube-Lamp-DC5V-p-1190966.html?rmmds=myorder&ID=515219&cur_warehouse=CN
Sign in to leave a comment
Sign in