Thingiverse
HC-SR501 PIR Sensor Compact Enclosure
by azaxi
58
Downloads
32
Likes
0
Makes
Latching PCB and backlid.
If 3-pin header is used for connection, it needs to be bent to fit (photo), alternatively solder wires directly to PCB. If electrolytic capacitors are interfering with corner latches, caps need to be gently bent out of the way (photo).
In case you are wondering about the black lense, its just permanent marker. Originally I wanted to limit sensor's field of view by painting portion of lense, but did not work and sensor was still sensitive in covered areas, so I pai
If 3-pin header is used for connection, it needs to be bent to fit (photo), alternatively solder wires directly to PCB. If electrolytic capacitors are interfering with corner latches, caps need to be gently bent out of the way (photo).
In case you are wondering about the black lense, its just permanent marker. Originally I wanted to limit sensor's field of view by painting portion of lense, but did not work and sensor was still sensitive in covered areas, so I pai
Sign in to leave a comment
Sign in