JGaurora A5 frame brace remix

I used the cr-10 frame brace as a way to make a brace for the JGaurora A5 printer. I extended the lower brace to allow the bed mount to clear the brace rods. I used sheet metal screws to attach to the base and the z tower. The rods are 5/16 or 8mm threaded rods cut to length and you will need 8 nuts to suite the rods or you could also use wingnuts on the top brace. On the A5 I had to move the bottom piece towards the front of the case to clear the usb ports so the piece was offset to suite the o