Raspberry Pi 7 inch touch lcd display 3030 mount

The bracket is designed for 3030 extrusions with a viewing angle of 15°. All ports are accessable if you rotate the display up to 180°. The USB micro-b (for power) and display ribbon cable have to face upwards.

For printing you have to mirror the second bracket (I've attached an image) and rotate it like I did.

2x M6x12 countersunk screw
2xM3x5mm

Edit the /boot/config.txt. Please add lcd_rotate=2. If you use instead display_rotate, the Touch display won't work.