Thingiverse
BristerMeast - 3 inch racing drone frame
by eksperts
19
Downloads
13
Likes
0
Makes
Fully 3D printed 3inch racing drone frame.
Accepts a 20x20 stack and a nano size camera.
Motor mounting pattern is 12mm (1306 should fit).
Print canopy in TPU, attach with 4 zip ties. 2 perimeters and about 20% 3D infill should work nicely.
Print baseplate in a rigid filament; I used XT-CF20. 4 perimeters, 5-7 top and bottom layers, and about 50% 3D infill.
My build weighs about 130g without a LiPo.
Accepts a 20x20 stack and a nano size camera.
Motor mounting pattern is 12mm (1306 should fit).
Print canopy in TPU, attach with 4 zip ties. 2 perimeters and about 20% 3D infill should work nicely.
Print baseplate in a rigid filament; I used XT-CF20. 4 perimeters, 5-7 top and bottom layers, and about 50% 3D infill.
My build weighs about 130g without a LiPo.
Sign in to leave a comment
Sign in