Thingiverse
Geprc Leopard Dji Hd Canopy
by Pezon
12
Downloads
12
Likes
1
Makes
This is a Dji Hd fpv canopy for Geprc Leopard fpv frames.
There is room for a two board high stack underneath the air unit.
Place for 900Mhz Crossfire or R9 T-antenna in front.
The fin is hollow for the long Camera cable to go up from the air unit and back down to the camera.
Front screws needs pressnuts/captive nuts, 25mm standoffs in the rear, can probably be replaced with usual nuts.
Fits LX4 LX5 LX6 LS4 LS5 LS6.
Tested with PLA and PETG.
There is room for a two board high stack underneath the air unit.
Place for 900Mhz Crossfire or R9 T-antenna in front.
The fin is hollow for the long Camera cable to go up from the air unit and back down to the camera.
Front screws needs pressnuts/captive nuts, 25mm standoffs in the rear, can probably be replaced with usual nuts.
Fits LX4 LX5 LX6 LS4 LS5 LS6.
Tested with PLA and PETG.
Sign in to leave a comment
Sign in