Thingiverse

450 Drone Quadcopter Behemoth

von 3dprinting_germany

72 Downloads

63 Likes

0 Makes

I designed this DJI 450 inspired 3D printable version, because I had printed the design of @villamany and had many trouble with it, especially with broken pieces and no consistent flight behaviour, so I decided to take the DJI F450 Design and make it a Behemoth, so even the 3D printed parts have maximum strength but yes, they are a little bit heavier.

https://youtu.be/-CmQ_CUXsfw

What you need to print:

- 4x ARM
- 1x BASE
- 1x TOP
- 2x LEG
- 1x FCSM

What you could print if you've got same parts:

- 1x GPS
- 1x BC
- 1x BVC

What you need to have: ( I use )

- 2x Motor CW with d=16/19mm drilling M3 ( 2216 810kV )
- 2x Motor CCW with d=16/19mm drilling M3 ( 2216 810kV )
- 4x ESC ( 30A )
- 1x PTB ( Matek PDB-XT60 )
- 1x FC ( F3 10DOF Deluxe )
- 2x Propeller CW ( 9450 / 1045 )
- 2x Propeller CCW ( 9450 / 1045 )
- 1x Receiver ( Taranis X8R )
- 4x Gimbal Damper ( 60g )
- 1x Transmitter ( Taranis Q X7 )
- 1x Battery 3-4S ( 3S 3500mAh )
- 1x Battery Strip ( B

450 arm base behemoth dji Drohne drone f450 frame Leg legs quad Quadcopter radiocontrolled Rahmen 450 arm base behemoth dji Drohne drone f450 frame Leg legs quad Quadcopter radiocontrolled Rahmen

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat