MakerWorld
3D Printer Accessories
Voir le modèle
4in Magnetic Hose coupler
78
Téléchargements
57
Likes
22
Makes
I purchased an ACMER AP220 smoke purifier for the H2D. It has a 3in input and came with a 4in hose adapter but I wanted a fast way to connect the hose. Yes this 4in coupler technically restricts down to about a 3in but it works great and that's the requirements for the ap220. magnets used actually measure 10x2.75mm so I believe these are 10x3mm. 8x per piece so 24 is needed for all three peices (base, hose connector, cap) Magnetic base mounts to the AP220 with 4x M4 screws on a 100mm bolt circle. I also made a neoprene gasket (83mm ID, 113mm OD) but that is not needed. This could be used for any project, just mount with your own hardware on a 100mm bolt circle. Check out my 4in output adapter for the Acmer AP220!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
