Thingiverse
4Moms Rockaroo mobile adapter
por yellowcarboy
0
Descargas
0
Likes
0
Makes
###Mobile adapter for the 4moms rockaroo.
4Moms model: 4m-012-01
The mobile I used was a wimmer ferguson mobile but I image others would work if they have the same square pin. The size was 11.5 mm x 11 mm.
I recommend you print flat (ie, the part laying down) with the use of supports, this way the print will be stronger as I put a hole through the entire part, this causes most slicers to put a solid material from top to bottom. Lastly, I put a bit of a support near the clip, so you will need to cut the clips free with a knife.
Like all my designs, use common sense and use at own risk.
4Moms model: 4m-012-01
The mobile I used was a wimmer ferguson mobile but I image others would work if they have the same square pin. The size was 11.5 mm x 11 mm.
I recommend you print flat (ie, the part laying down) with the use of supports, this way the print will be stronger as I put a hole through the entire part, this causes most slicers to put a solid material from top to bottom. Lastly, I put a bit of a support near the clip, so you will need to cut the clips free with a knife.
Like all my designs, use common sense and use at own risk.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
