509 MUNS Emblem

The size can be changed, but be sure to keep Z-height the same in order for the color changes to be accurate! Project: 509MUNSLogo.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #13 (1.12mm) swap to Dark Red At layer #16 (1.36mm) swap to Yellow for the rest.