50cent hueforge

2versions incluesversion 1 : 2amsversion 2: 1ams*Project: 50cent art color.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Orange Transmission Distance: 7 PLA esun cold white Transmission Distance: 3This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to Ice Blue At layer #13 (1.12mm) swap to Orange At layer #19 (1.6mm) swap to esun cold white attention utiliser un blan froid comme le esun cold white sinon le orange resortira