55338-EG00A Strut Mount Seal

This is a replacement Strut Mount Seal and was made to replace the OEM gasket on a 2008 Infiniti G35x (part number 55338-EG00A), but may fit other Infiniti/Nissan models as well. It MUST be printed in a really tough material, like TPU for resistance to oil, grease and abrasion (https://en.wikipedia.org/wiki/Thermoplastic_polyurethane). Use at your own risk.

This should cost you less than $0.15 per seal in material and about 30 minutes to print using TPU compared to the $40+ per seal for the OEM replacment. I used Priline TPU (Shore hardness 98A) which I've had really good results with (AFLINK: https://www.amazon.com/gp/product/B074DTLGPV?ie=UTF8&th=1&linkCode=sl1&tag=3dwebe-20&linkId=8a108ab08cc1381047cfd83d58edf64e&language=en_US&ref_=as_li_ss_tl).

The OEM seal is 0.4mm thick, this version is 0.6mm thick so when printing at 0.2mm layers you'll get 3 layers. Scale up on the Z axis if you prefer a thicker seal, but make sure to have enough bottom/top layers to create a solid p