55mm spindle mount for OX

Print with thick walls and 50% infill and use 2 or 3 of them to mount a 55mm spindle to an Open Builds OX's Z Axis. Use PETG or ABS, I don't know if PLA can handle the temp or if the spindle gets hot enough for that to be a problem.

Uses 2 M5x15mm bolts with low profile heads (the kind used everywhere else on the Ox) + 2 x M5x25mm for the clamps and 2 M5 nuts.

Printed this at 0.3mm layer, 210ºC (PLA), 2.4mm walls and 30% infill and it seems very strong already. I'll eventually print it out of ABS if the PLA doesn't hold up well enough.